Ghost 2 Immobiliser

From: £499.00

The Biggest Name In Vehicle Immobilisation

  • Car protected with your own PIN code entered via your steering wheel or dashboard
  • Unique & secure emergency code should the PIN be forgotten

+ Vehicle Tracking Solution

Low Cost Subscription

+ Insurance Approved S7 Tracker

+ Insurance Approved S5 Tracker

Description

Description

Ghost 2 Immobiliser – The Ultimate in Vehicle Security

If you’re serious about protecting your vehicle from modern-day theft, the Ghost 2 Immobiliser is the revolutionary security solution you’ve been searching for. Designed using advanced CAN bus technology, this next-generation immobiliser offers invisible protection that traditional car alarms and trackers simply can’t match. It provides an unmatched layer of security by directly integrating into your vehicle’s electronic system and preventing the engine from starting unless a unique PIN code sequence is correctly entered. No key fobs. No wireless signals. No compromises.

Unlike standard systems that rely on physical keys or easily intercepted signals, the Ghost 2 is a completely covert immobiliser system. There are no tell-tale signs ofits presence — no blinking lights, antennas, or additional buttons — making it virtually undetectable to thieves. As vehicle theft continues to rise, especially with methods like key cloning and relay attacks, Ghost 2 offers the intelligent defense needed for the cars of today and tomorrow.


Stealth Technology That Outsmarts Car Thieves

The Ghost 2 Immobiliser takes a different approach from conventional anti-theft systems. It communicates directly with your vehicle’s CAN bus – a digital system that governs how different components in your car interact. Instead of relying on alarms or tracking devices that can be bypassed or removed, the Ghost 2 works silently in the background, requiring the correct PIN sequence (entered via buttons already built into your car) before your vehicle will start.

That means even if someone gains access to your key, remote fob, or tries to hijack your vehicle’s onboard systems, they still won’t be able to start the engine. Ghost 2 renders key cloning, ECU swapping, and diagnostic tool hacking useless. It doesn’t draw attention, and because there’s no way to visibly detect or disable it without intimate knowledge of its setup, it leaves even the most experienced criminals baffled.

This kind of advanced immobilisation is especially valuable for high-value vehicles — think BMWs, Audis, Land Rovers, Teslas, and commercial vans that are often targeted for parts or resale. Ghost 2 gives owners a true sense of control and assurance, whether they’re parking on the street, in public garages, or leaving the vehicle for extended periods.


Simple to Use, Hard to Beat

While the Ghost 2 Immobiliser is high-tech on the inside, it’s designed with the user in mind. Once installed by a professional, it becomes a seamless part of your driving experience. Disarming the system is as easy as entering your secret PIN code via dashboard buttons like those on the steering wheel or center console. This ensures you’re protected without the need for extra key fobs, cards, or phone apps.

Need to have your car serviced or valeted? No problem. Ghost 2 includes a secure Valet Mode that temporarily disables the PIN sequence so others can operate your vehicle without compromising your protection. Once done, the system resumes full security functionality.

It also supports Smartphone App integration for both Android & IOS (when paired with compatible devices), allowing users to easily change PINs or switch between modes. Most importantly, there are no subscription fees or ongoing costs — just a one-time investment that delivers long-term peace of mind.

This system is also battery-safe, drawing minimal power and ensuring your vehicle’s performance remains unaffected. With built-in safeguards, encrypted data transfer, and industry-leading design, the Ghost 2 provides a future-proof solution that’s trusted by car enthusiasts, luxury vehicle owners, and fleet operators alike.


Protect What Matters Most

With car theft becoming increasingly digital, it’s no longer enough to rely on standard factory alarms. Thieves can gain entry to a vehicle in seconds with key cloning, OBD port attacks, and remote signal interception — all without even touching the original key. The Ghost 2 Immobiliser provides proactive protection, stopping thieves before the engine even starts.

By choosing Ghost 2, you’re not just installing a device; you’re making a statement: Your car is off-limits. Whether you’re a parent protecting the family SUV, a business owner securing your fleet, or a car enthusiast guarding a prized vehicle, Ghost 2 gives you the confidence to leave your car anywhere, anytime.

Additional information

Additional information

Disarm Options

,

Service Mode

Insurance Approved

Compatible Vehicles

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Immobilisation Options

, ,

product category

Manufacturers Warranty

Brand

Subscription

+ Vehicle Tracking Solution

Insurance Approved

product category

Manufacturers Warranty

Brand

Subscription

+ Insurance Approved S7 Tracker

Insurance Approved

, ,

product category

Manufacturers Warranty

Brand

Subscription

+ Insurance Approved S5 Tracker

Insurance Approved

, ,

product category

Manufacturers Warranty

Brand

Subscription

Videos

Videos

Audi

 

Bentley

 

BMW

 

Ferrari

 

Ford

 

JEEP

 

Lamborghini

 

Land Rover

 

Lexus

 

Mercedes-Benz

 

Porsche

 

Rolls-Royce

 

Toyota

 

Volkswagen

How To

How To

 

Find All The Products How To’s Below

How To Enter The Emergency Disarm Code

Take note of the 4-digit override code unique to your device.(e.g.3241)

  • Switch on the ignition.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the first digit of the code. (e.g.3)
  • Release the brake pedal to confirm the first digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the second digit of the code. (e.g.2)
  • Release the brake pedal to confirm the second digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the third digit of the code. (e.g.4)
  • Release the brake pedal to confirm the third digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the fourth digit of the code. (e.g.1)
  • Release the brake pedal to confirm the third digit. The indicators will begin to flash.
  • Now follow the How To Change Your Disarm Code from step 6.
Video Instructions

How To Change Your Disarm Code 
  • Switch on the ignition without starting the engine.
  • Enter the current disarm sequence – 2 flash confirmation.
  • Press and hold the accelerator pedal to the floor (alternative for some vehicles).
  • Enter the current disarm sequence again – the indication will start to flash once every 3 seconds. This means the Ghost is in learning mode.
  • Release the accelerator pedal.
  • Enter the new disarm sequence.
  • Wait for 3 flashes.
  • Enter the new disarm sequence again
  • Wait for 2 flashes to confirm the process was successful. Four flashes meant there was an error. If so, repeat from step 1.
Video Instructions

How To Activate/Deactivate Service Mode

To Activate

  • Disarm the system using your disarm sequence.
  • Drive to, and park at the dealership, airport, valeters etc. and while the engine is still running, press your service button 5 times.
  • The indication lamp will flash back at you 5 times to confirm service / valet mode has been entered.
  • Turn off the vehicle.

To Deactivate

  • Turn on the ignition without starting the engine.
  • Enter the current disarm sequence – 2 flash confirmation.
  • The next time the ignition is switched off, the Ghost will rearm as normal.
Video Instructions

Downloads

Downloads

Download The Product Manuals Below

Ghost 2 User Manual

You may also like…

Frequently Asked Questions

The Ghost 2 is not a GPS tracker. The system is purely a discrete pin to drive immobiliser. Many customers opt for a combination of a Ghost+Insurance Approved Tracker to satisfy the insurance company &amp have a piece of mind knowing the vehicles’ location at all times.

The Standard Ghost 2 Immobiliser provides protection against common methods of attack such as : Key Cloning, Key Relaying, Key Theft & ECU swapping. 6 years on from its release, theft methods have advanced with dedicated override machines now on the market. These attacks are referred to as CAN-BUS combination attacks using dedicated “Emergency Start Devices”.

Yes, however we highly discourage using this feature. When using a phone to disarm, the connection range can be well in excess of 10 meters. Meaning the Ghost 2 could be disarmed during an attack if the vehicle was parked within range. e.g. on the driveway.

The push sequence can be changed as many times as you want. Using factory buttons on the vehicle, a combination of 4-20 individual presses can be selected.

Shopping cart

1

Subtotal: £699.00

View basketCheckout