Ghost 2 Immobiliser

From: £499.00

The Biggest Name In Vehicle Immobilisation

  • Car protected with your own PIN code entered via your steering wheel or dashboard
  • Unique & secure emergency code should the PIN be forgotten

+ Vehicle Tracking Solution

Low Cost Subscription

+ Insurance Approved S7 Tracker

+ Insurance Approved S5 Tracker

Description

Description

The Ghost 2 Immobiliser

The Ghost protects your car from key-cloning, hacking, and even key theft. 

The Ghost 2 Immobiliser provides undetectable protection for your car. With no LED indication, authorisation tags, or dedicated immobiliser circuits that can be bypassed.

​The Ghost uses throuhgout the vehicle such as on the steering wheel, door panels or center console for a unique, changeable, disarm sequence (like a PIN code) that must first be entered before you can drive the car.​

​Servicing Mode Feature:

The Ghost 2 immobilisation systems has a service mode feature that you can temporarily disable the code so the garage can service your car without having to know your code.

Changing Your PIN Code:

​The Ghost 2 has the ability to change the pin code whenever you wish. There is a special procedure to do this. This will also be demonstrated at the time of installation. So if you think your code has been compromised you can change it.

The Ghost 2 Immobiliser operates on the vehicles Can-Bus network which runs throughout the vehicle. Making the Ghost 2 immobiliser concealable virtually anywhere in your vehicle’s chassis.

  •  Block Your Engine from Starting – The Ghost 2 Immobiliser system is designed to prevent your car’s engine from starting unless you input your unique PIN code. In its Standard Form, the Ghost 2 Immobiliser blocks the vehicle from starting through a digital CAN bus, meaning no wires are cut.
  • No Radio Frequency Signals – The Ghost 2 Immobiliser system does not transmit radio signals, meaning car thieves can’t use sophisticated radio frequency scanning technology to scan and locate the device.
  • Methods Of Attack – The Standard Ghost 2 Immobiliser provides protection against common methods of attack such as : Key Cloning, Key Relaying, Key Theft & ECU swapping.

Tassa Verified:

The Ghost 2 Immobiliser is TASSA verified. The Tracking & Aftermarket Securirty Systems Association (TASSA) is a 3rd party group of industry experts from police and security testing backgrounds. Supporting innovative vehicle security products gain the recognition they deserve.To find out more visit : www.tassa.pro

Additional information

Additional information

Disarm Options

,

Service Mode

Insurance Approved

Compatible Vehicles

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Immobilisation Options

, ,

product category

Manufacturers Warranty

Brand

Subscription

+ Vehicle Tracking Solution

Insurance Approved

product category

Manufacturers Warranty

Brand

Subscription

+ Insurance Approved S7 Tracker

Insurance Approved

, ,

product category

Manufacturers Warranty

Brand

Subscription

+ Insurance Approved S5 Tracker

Insurance Approved

, ,

product category

Manufacturers Warranty

Brand

Subscription

Videos

Videos

Audi

 

Bentley

 

BMW

 

Ferrari

 

Ford

 

JEEP

 

Lamborghini

 

Land Rover

 

Lexus

 

Mercedes-Benz

 

Porsche

 

Rolls-Royce

 

Toyota

 

Volkswagen

How To

How To

 

Find All The Products How To’s Below

How To Enter The Emergency Disarm Code

Take note of the 4-digit override code unique to your device.(e.g.3241)

  • Switch on the ignition.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the first digit of the code. (e.g.3)
  • Release the brake pedal to confirm the first digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the second digit of the code. (e.g.2)
  • Release the brake pedal to confirm the second digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the third digit of the code. (e.g.4)
  • Release the brake pedal to confirm the third digit.
  • Depress and hold the brake pedal.
  • Press the accelerator pedal to the floor a number of times corresponding to the fourth digit of the code. (e.g.1)
  • Release the brake pedal to confirm the third digit. The indicators will begin to flash.
  • Now follow the How To Change Your Disarm Code from step 6.
Video Instructions

How To Change Your Disarm Code
  • Switch on the ignition without starting the engine.
  • Enter the current disarm sequence – 2 flash confirmation.
  • Press and hold the accelerator pedal to the floor (alternative for some vehicles).
  • Enter the current disarm sequence again – the indication will start to flash once every 3 seconds. This means the Ghost is in learning mode.
  • Release the accelerator pedal.
  • Enter the new disarm sequence.
  • Wait for 3 flashes.
  • Enter the new disarm sequence again
  • Wait for 2 flashes to confirm the process was successful. Four flashes meant there was an error. If so, repeat from step 1.
Video Instructions

How To Activate/Deactivate Service Mode

To Activate

  • Disarm the system using your disarm sequence.
  • Drive to, and park at the dealership, airport, valeters etc. and while the engine is still running, press your service button 5 times.
  • The indication lamp will flash back at you 5 times to confirm service / valet mode has been entered.
  • Turn off the vehicle.

To Deactivate

  • Turn on the ignition without starting the engine.
  • Enter the current disarm sequence – 2 flash confirmation.
  • The next time the ignition is switched off, the Ghost will rearm as normal.
Video Instructions

FAQ'S

FAQ'S

 

Frequently Asked Questions

Is The Ghost 2 A GPS Tracker?

The Ghost 2 is not a GPS tracker. The system is purely a discrete pin to drive immobiliser. Many customers opt for a combination of a Ghost+Insurance Approved Tracker to satisfy the insurance company &amp have a piece of mind knowing the vehicles’ location at all times.

Why Upgrade To Pro Immobililsation?

The Standard Ghost 2 Immobiliser provides protection against common methods of attack such as : Key Cloning, Key Relaying, Key Theft & ECU swapping.

6 years on from its release, theft methods have advanced with dedicated override machines now on the market. These attacks are referred to as CAN-BUS combination attacks using dedicated “Emergency Start Devices”.

Can A Phone Be Paired To The Ghost 2 Immobiliser

Yes, however we highly discourage using this feature. When using a phone to disarm, the connection range can be well in excess of 10 meters. Meaning the Ghost 2 could be disarmed during an attack if the vehicle was parked within range. e.g. on the driveway.

Can I Choose My Own Code

The push sequence can be changed as many times as you want. Using factory buttons on the vehicle, a combination of 4-20 individual presses can be selected.

Downloads

Downloads

Download The Product Manuals Below

Ghost 2 User Manual

You may also like…

Shopping cart

0
image/svg+xml

No products in the cart.